BLOWER |
|
| |  |
SPENCER CUPOLA BLOWER, MODEL 75HP, S/N 259616, 4000 CFM
| Tag Number:9011 | GRAFTON, OH |
|
|
|
 | |
2006 SPENCER POWER MIZER 250 HP BLOWER MODEL C63 616241A1 S/N 806970-A06 EQUIPPED WITH 1-65 DEGREE AND 2- 45 DEGREE STAGES, INLET DRIVEN, A1 POSITION RATED AT 7000 CFM AT 70 OZ. SP, WITH INLET FILTER
| Tag Number:9109 Model:616241A1 | GRAFTON, OH |
|
|
CLEANING |
|
 | |
MASS FINISHING MODEL HZ-330 CENTRIFUGAL BARREL FINISHING MACHINE 25 HP, 10.5 CU FT CAPACITY
| Tag Number:9204 Model:HZ330 | GRAFTON, OH |
|
|
|
 | |
MASS FINISHING MODEL HZ-330 CENTRIFUGAL BARREL FINISHING MACHINE 25 HP, 10.5 CU FT CAPACITY
| Tag Number:9203 Model:HZ330 | GRAFTON, OH |
|
|
|
 | |
1993 SINTOBRATOR MODEL DZB-2EB AUTOMATIC DRY FINISHING ROLL FLOW CENTRIFUGAL DISK CLEANING MACHINE S/N DZB-2EB-100
| Tag Number:9039 Model:DZB-2EB | GRAFTON, OH |
|
|
|
 | |
1995 SINTOBRATOR MODEL EVF-08RD AUTOMATIC DRY FINISHING ROLL FLOW CENTRIFUGAL DISK CLEAING MACHINE S/N EVF-08RD-012, 4.1 CU FT CAPACITY
| Tag Number:9038 Model:EVF-08RD | GRAFTON, OH |
|
|
|
| | |
CLEMCO MODEL 2425 6 CU FT LO-POT HAND BLAST MACHINE
| Tag Number:9249 Model:2425 | GRAFTON, OH |
|
|
|
 | |
WHEELABRATOR SPINNER HANGER BLAST CLEANING MACHINE MODEL MSH4-600 S/N 300532 WITH TWO 10 HP SHOT WHEELS AND SHOT SYSTEM, 4 COMPARTMENT, 24" DIAMETER X 39" WORK AREA, BUILT IN DUST COLLECTOR
| Tag Number:9052 | GRAFTON, OH |
|
|
|
 | |
WHEELABRATOR 48" DOUBLE DOOR SWING TABLE BLAST CLEANING MACHINE S/N A99385
| Tag Number:8606 Model:48" DD | GRAFTON, OH |
|
|
|
 | |
WHEELABRATOR 6' DIAMETER SINGLE DOOR SWING TABLE BLAST CLEANING MACHINE S/N A120455 IN VERY GOOD CONDITION
| Tag Number:8955 | GRAFTON, OH |
|
|
|
 | |
PANGBORN MODEL 6GNR 6 CU FT RUBBER BELT TUMBLAST CLEANING MACHINE S/N 5341
| Tag Number:8615 Model:6GNR | GRAFTON, OH |
|
|
CONVEYOR |
|
 | |
18 " X 9' LONG BELT CONVEYOR
| Tag Number:8596 | GRAFTON, OH |
|
|
|
 | |
18' X 11' BELT CONVEYOR
| Tag Number:8598 | GRAFTON, OH |
|
|
|
 | |
18" X 11' BELT CONVEYOR
| Tag Number:8599 | GRAFTON, OH |
|
|
|
 | |
NEWAYGO BELT CONVEYOR 18" WIDE X 10' 8" LONG WITH AIREATOR& HOPPER 44" W X 6'6" L X 31" H
| Tag Number:8518 Model:CV 1444 | GRAFTON, OH |
|
|
|
 | |
2- ALVEY 36" 90 DEGREE BELT CONVEYORS WITH DRIVES
PRICED EACH
| Tag Number:21 | CUYAHOGA HEIGHTS, OH |
|
|
|
 | |
5' SECTION OF ALVEY 36" BELT CONVEYOR WITH DRIVE AND TIP UP
| Tag Number:20 | CUYAHOGA HEIGHTS, OH |
|
|
|
 | |
ALVEY 36" X 6' BELT CONVEYOR WITH DRIVE AND LEGS
| Tag Number:13 | CUYAHOGA HEIGHTS, OH |
|
|
|
 | |
ALVEY 36" X 6' BELT CONVEYOR WITH DRIVE AND LEGS
| Tag Number:31 | CUYAHOGA HEIGHTS, OH |
|
|
|
 | |
ALVEY 36" X 6' POWERED BELT CONVEYOR WITH DRIVE
| Tag Number:11 | CUYAHOGA HEIGHTS, OH |
|
|
|
 | |
PEKAY SAND SYSTEM WITH RECEIVING HOPPER, 14" X 25' INCLINE BELT CONVEYOR WITH SWIVEL BOTTOMCOOLARATOR WITH 4 WHEEL, COOLING BLOWER AND CONTROLS S/N M320-4-14
| Tag Number:8739 | GRAFTON, OH |
|
|
|
| | |
SELF ALIGNING DIVERTER BELT CONVEYOR 36" X 5' LONG WITH DRIVE
| Tag Number:36 | CUYAHOGA HEIGHTS, OH |
|
|
|
 | |
TROUGHING BELT CONVEYOR 24" WIDE 31' LONG WITH FEED HOPPER 13' LONG X 6' WIDE 7'6" TALL AND AEREATOR
| Tag Number:8962 | GRAFTON, OH |
|
|
|
 | |
GK VIBRATING DRIVE MOTOR ONLY 6.4 HP RATED CAPCITY 10010 LB
4650 KG 2600 WATTS 1152 RPM 230/460 VOLTS
| Tag Number:6633.2 Model:B950/6 | GRAFTON, OH |
|
|
|
 | |
HINDON B950/6 130016/AA/61 VIBRATING DRIVE MOTOR ONLY RATED CAPCITY 10010 4550 KG 1152RPM 4.7 HP 2600 WATTS 230/460
| Tag Number:6662.1 Model:B950/6 | GRAFTON, OH |
|
|
|
|
| |
HINDON B955/ 4 VIBRATING DRIVE MOTOR ONLY 6.4 HP RATED CAPCITY 15400 LBS 7000 KG 230/460 VOLT 4800 WATTS 1728 RPM
| Tag Number:6633.1 Model:B955/ 4 | GRAFTON, OH |
|
|
|
|
| |
INVICTA VIBRATING DRIVE MOTOR ONLY RATED CAPACITY 10010 4500 KG 1152 RPM 2600 WATTS
| Tag Number:6662.2 Model:B950/6 | GRAFTON, OH |
|
|
|
 | |
2001 STEWERT GLAPAT MODEL 2065T30SP 30" X 20/48' EXTENDABLE BELT CONVEYOR S/N 0114630-5 RATED AT 20-60' PER MINUTE, 100 # STRUCTURAL LOAD, LEFT TO RIGHT VARIABLE SPEED DRIVE AND HYDRAULIC EXTENTION SYSTEM AND BELT DRIVE
| Tag Number:1 Model:2065T30SP | GREENSBURG, IN |
|
|
|
|
| |
2001 STEWERT GLAPAT MODEL 2065T30SP 30" X 20/48' EXTENDABLE BELT CONVEYOR S/N 0114630-6 RATED AT 20-60' PER MINUTE, 100 # STRUCTURAL LOAD, LEFT TO RIGHT VARIABLE SPEED DRIVE AND HYDRAULIC EXTENTION SYSTEM AND BELT DRIVE
| Tag Number:2 Model:2065T30SP | GREENSBURG, IN |
|
|
|
 | |
NEW CONVEYOR HEAD PULLEY 24" DIA. X 44" 4" SHAFT TO 3 5/8 " W/ 7/8 KEY WAY
| Tag Number:8020 | GRAFTON, OH |
|
|
|
 | |
NEW CONVEYOR HEAD PULLEY 24" DIA. X 44" SHAFT 4" TO 3 5/8 " W/ 7/8 KEY WAY
| Tag Number:8020.1 | GRAFTON, OH |
|
|
|
 | |
1993 G/K MODEL FRC 36/51.12 36/51" X 12' PARA MOUNT II FEEDER S/N C7322.6 RATED AT 60 TPH SAND AND CASTINGS 3HP DRIVE
| Tag Number:8864 Model:FRC 36/51.12 | GRAFTON, OH |
|
|
|
 | |
1993 G/K MODEL SCRL18.405 18" X28" X40' 7" DEEP OSCILLATING CONVEYOR S/N C7322-19
| Tag Number:8849 Model:SCRL18.405 | GRAFTON, OH |
|
|
|
 | |
1993 G/K MODEL SCRT 30/48.39.81.15 30/48" X 39'9" X 15" DEEP OSCILLATING CONVEYOR S/N C7322.3 RATED 7.5 HP DRIVE WITH HOOD
| Tag Number:8855 Model:SCRT 30/48.39.81.15 | GRAFTON, OH |
|
|
|
 | |
CARRIER MODEL H60120-210S 60" X 79' OSCILLATING CONVEYORS/N 15153 WITH 15 HP DRIVE, DISCHARGE HEIGH
| Tag Number:7925 Model:H60120-210S | GRAFTON, OH |
|
|
|
 | |
CARRIER MODEL N-5480-F OSCILLATING CONVEYOR S/N 15615
54"/ 66" X 50'
| Tag Number:9267 Model:N-5480-F | GRAFTON, OH |
|
|
|
 | |
G/K MODEL SC48/54 X35.6 48" X 35' OSCILLATING CONVEYOR WITH HOOD S/N C3581.5 42" DSICHARGE
| Tag Number:8946 | GRAFTON, OH |
|
|
|
 | |
G/K MODEL SCRT 48.21 48" X 19' OSCILLATING CONVEYOR S/N C8358.2 WITH SPLIT SORTING DECK , 46" DISCHARGE HEIGHT, 6" SIDES, 24/18" SPLIT SECTION
| Tag Number:8700 Model:SCRT48.21 | GRAFTON, OH |
|
|
|
 | |
G/K MODEL SCRT 48.50 OSCILLATING CONVEYOR 48/60/18 WITH DUST HOOD S/N C6248-3
| Tag Number:8892 Model:SCRT48.50 | GRAFTON, OH |
|
|
|
 | |
GK OSCILLATING FEEDER MODEL TWFRC30.10 S/N C7322-2 TWO DRIVES 28" X 57" X10', (2) 5HP DRIVES
| Tag Number:8861 Model:TWFRC30.10 | GRAFTON, OH |
|
|
|
 | |
KINERGY MODEL KDF SOF -36 DOUBLE DECK OSCILLATING CONVEYOR
36" X 6'
| Tag Number:8441 Model:KDF SOF-36 | GRAFTON, OH |
|
|
|
| | |
OSCILLATING CONVEYOR 18" X 5' 6" 24" HIGH
| Tag Number:8583.1 | GRAFTON, OH |
|
|
|
 | |
RAPID 3 HP DRIVE FOR OVERHEAD MONORAIL
| Tag Number:6982 | GRAFTON, OH |
|
|
|
 | |
ROLLER CONVEYOR REJECT STATION WITH 22" PLASTIC ROLLER AND ENCLOSURE, PULL OFF ARM
| Tag Number:33 | CUYAHOGA HEIGHTS, OH |
|
|
|
 | |
ALVEY 34" BELT ASSISTED ROLLER CONVEYOR 10' LONG 1 11/16" DIAMETER ROLLERS ON 3" CENTERS WITH DRIVE AND 1- 90 DEGREE CURVE SECTION
| Tag Number:14 | CUYAHOGA HEIGHTS, OH |
|
|
|
| | |
(2) POWER ROLLER CONVEYOR 28" WIDE X 11'6" LONG 5' ROLLERS 8" CENTERS AND # 8685 TRANSFER CAR
| Tag Number:8685.1 | GRAFTON, OH |
|
|
|
 | |
POWERED ROLLER CONVEYOR 10' WIDE 11' LONG 5" DIA ROLLERS ON 12" CENTERS WITH DRIVE
| Tag Number:9234 | GRAFTON, OH |
|
|
|
 | |
POWERED ROLLER CONVEYOR 10' WIDE 8' LONG 5" DIA ROLLERS ON 12" CENTERS
| Tag Number:9235 | GRAFTON, OH |
|
|
|
 | |
NEW CONVEY0R TAIL PULLEY 24" DIA. X 44" WITH 4" SHAFT
| Tag Number:8020.3 | GRAFTON, OH |
|
|
|
 | |
NEW CONVEYOR TAIL PULLEY 24"DIA. X 44" WITH 4" SHAFT
| Tag Number:8020.2 | GRAFTON, OH |
|
|
|
 | |
CONVEYOR TRANSFER CAR WITH POWERED ROLLER CONVEYOR 10' WIDE 10' LONG WITH DRIVE
| Tag Number:9233 | GRAFTON, OH |
|
|
COOLER |
|
 | |
AIRTEK MODEL 550-440V AIR COOLER FOR 35 HP AIR COMPRESSOR S/N 500J7848-9
| Tag Number:7220 Model:550.440V | GRAFTON, OH |
|
|
|
| | |
250 HP DRIVE MOTOR AND HYDRAULIC CLUTCH FOR SIMPSON MC300 SAND COOLER MODEL 20-243-03
| Tag Number:9132 Model:MC300 | GRAFTON, OH |
|
|
|
 | |
NEW OR REBUILT SIMPSON MODEL K187 GEAR BOX S/N 870045448-05 RATIO 27.92 FOR SIMPSON MC300 SAND COOLER
| Tag Number:9091 Model:MC300 | GRAFTON, OH |
|
|
|
 | |
USED SIMPSON MODEL K187 GEAR BOX FOR MC300 COOLER
| Tag Number:9091.1 Model:MC300 | GRAFTON, OH |
|
|
|
| | |
USED SIMPSON MODEL K187 GEAR BOX FOR MC300 SAND COOLER S/N 870086597.05
| Tag Number:9131 Model:MC300 | GRAFTON, OH |
|
|
|
 | |
USED SIMPSON MODEL K187 GEAR BOX S/N 870086605-05 RATIO 27.92 FOR SIMPSON MC300 SAND COOLER
| Tag Number:9130 Model:MC300 | GRAFTON, OH |
|
|
CORE |
|
| | |
PALMER BINDER PUMP SYSTEM S/N PS2301 2 PUMPS, B&P GAS GENERATOR
| Tag Number:47 | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL 420 CORE BLOWER NSN
| Tag Number:8678 Model:420D | GRAFTON, OH |
|
|
|
 | |
1994 LAEMPE MODEL L20 COLD BOX CORE MACHINE S/N 906 EQUIPPED WITH MODEL 93-0-1 GAS GENERATOR, MODEL SME1.5 MIXER, ENCLOSURE AND CONTROLS
| Tag Number:8667 Model:L20 | GRAFTON, OH |
|
|
|
 | |
1994 LAEMPE MODEL LF100H 100 LITER COLD BOX CORE MACHINE S/N 883 EQUIPPED WITH MODEL SM6.3 MIXER, MODEL LG1.5 GENERATOR, PLC CONTROLS, INTERAL MODEL GK100 GAS SCRUBBER WITH BLOWER AND CONTROLS (THIS UNIT HAS BEEN DISASSSEMBLED AND IS IN STORAGE)
Tag Number:1 Model:LF100H
Featured Price:$62,500.00 - WE HAVE REDUCED THE PRICE THIS IS A STEAL AT THIS PRICE LOADED ON TRUCK | WINGHAM, ON |
|
|
|
 | |
2000 LORIMENDI MODEL SLCA-40L/CF 40 LITER COLD BOX CORE MACHINE S/N 000145B EQUIPPED WITH 40 LITER PLOW, ALLEN BRADLEY PLC CONTROLS, ENCLOSURE, PICKOFF, PATTERN SHUTTLE
| Tag Number:41 Model:SLCA-40L/CF | GRAFTON, OH |
|
|
|
|
| |
2000 LORIMENDI MODEL SLCA-40L/CF COLD BOX CORE MACHINE S/N 970115A EQUIPPED WITH 40 LITER BLOW, ALLEN BRADLEY PLC CONTROLS, ENCLOSURE, PICKOFF, PATTERN SHUTTLE
| Tag Number:40 Model:SLCA-40L/CF | GRAFTON, OH |
|
|
|
 | |
EMI MODEL PCB30 COLD BOX CORE BLOWER S/N 1293-5359-2, 30 # BLOW WITH GASSING STATION
| Tag Number:9251 Model:PCB30 | GRAFTON, OH |
|
|
|
 | |
GAYLORD MODEL 24VSTB 24 LITER COLD BOX CORE MACHINE WITH BELT DISCHARGE
| Tag Number:9126 Model:24VSTB | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL CB16SA COLD BOX VERTICALLY SPLIT CORE MACHINE S/N 272-152
| Tag Number:8663 Model:CB16SA | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL CB-16-SA VERTICALLY SPLIT COLD BOX CORE MACHINE S/N 677-346
| Tag Number:8010 Model:CB16SA | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL CB16SA VERTICALLY SPLIT COLD BOX CORE MACHINE NSN MISSING PLC CONTROL
| Tag Number:8665 Model:CB16SA | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL CB16SA VERTICALLY SPLIT COLD BOX CORE MACHINE S/N 1277-355 EQUIPPED WITH ALLEN BRADLEY SL5-01 PLC CONTROLS AND GAYLORD MODEL LLC-75 GAS GENERATOR
| Tag Number:8662 Model:CB16SA | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL CB22SA 50# COLD BOX VERTICAL CORE MACHINE REBUILT BY CMI 1993 S/N 93005 EQUIPPED WITH GE FANUC PLC CONTROLS AND GAYLORD MODEL LLC-G75 GAS GENERATOR
| Tag Number:8660 Model:CB22SA | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL CB22SA 50# COLD BOX VERTICALLY SPLIT CORE MACHINE NSN EQUIPPED WITH GE FANUC SERIES ONE PLC AND GAYLORD LLC-75 GAS GENERATOR
| Tag Number:8658 Model:CB22SA | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HCB-22 75# HORIZONTAL COLD BOX CORE MACHINE REBUITL BY CMI 1992 MODEL 92227 S/N 10-92 WITH ALLEN BRADLEY SLC150 PLC CONTROLS AND HYDRAULIC SYSTEM
| Tag Number:8657 Model:HCB-22 | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HCB-22-BT 75# HORIZANTALLY SPLIT COLD BOX CORE MACHINE S/N HCB-22-BT-384-450 WITH GAYLORD GAS GENERATOR
| Tag Number:7127 Model:HCB-22-BT | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HCB-22-BT 75# HORIZONTALLY SPLIT COLD BOX CORE MACHINE S/N HCB-22-BT-582-436 WITH GAYLORD GAS GENERATOR
| Tag Number:7128 Model:HCB-22-BT | GRAFTON, OH |
|
|
|
| | |
COMMON MT GAS DELIVERY SYSTEM WITH CONTROLS
| Tag Number:48 | GRAFTON, OH |
|
|
|
 | |
KLEIN RESIN TANK WITH HEATER
| Tag Number:38 | GRAFTON, OH |
|
|
|
|
| |
KLEIN RESIN TANK WITH HEATER
| Tag Number:39 | GRAFTON, OH |
|
|
|
| | |
(5) REDFORD 42 CORE MACHINES FOR PARTS
| Tag Number:8602 Model:HP42 | GRAFTON, OH |
|
|
|
| | |
1964 REDFORD MODEL HP42G SHELL CORE MACHINE S/N 1264-536
| Tag Number:7219 Model:HP42G | GRAFTON, OH |
|
|
|
 | |
1980 REDFORD MODEL CB12SA COLD BOX CORE MACHINE S/N 280-116
| Tag Number:8059 Model:CB12SA | GRAFTON, OH |
|
|
|
 | |
B AND P MODEL SF104AP SHELL CORE MACHINE S/N CSC104AP 293 7501 WITH BLOWER AND CONTROLS
| Tag Number:9069 Model:SF104A | GRAFTON, OH |
|
|
|
 | |
B AND P MODEL SF104AP SHELL CORE MACHINE S/N CSC104AP 299 7811 WITH BLOWER AND CONTROLS
| Tag Number:9070 Model:SF104A | GRAFTON, OH |
|
|
|
| | |
B AND P MODEL SF6CA SHELL CORE MACHINE S/N CSC6 314 6308 WITH CONTROLS
| Tag Number:9082 Model:SF6CA | GRAFTON, OH |
|
|
|
| | |
B AND P MODEL SF6CA SHELL CORE MACHINE S/N CSC6 522 6609 WITH CONTROLS
| Tag Number:9083 Model:SF6CA | GRAFTON, OH |
|
|
|
| | |
B AND P MODEL SF6CA SHELL CORE MACHINE S/N CSC6 523 6609 WITH CONTROLS
| Tag Number:9081 Model:SF6CA | GRAFTON, OH |
|
|
|
 | |
B& P MODEL SF6CA SHELL CORE MACHINE S/N CSC-6-899-T8013 WITH CONTROLS AND FEED HOPPER
| Tag Number:8980 Model:SF6CA | GRAFTON, OH |
|
|
|
 | |
B&P MODEL SF10A SHELL CORE MACHINE WITH PLC CONTROLS
| Tag Number:8810 Model:SF10A | GRAFTON, OH |
|
|
|
 | |
B&P MODEL SF10A SHELL CORE MACHINE WITH PLC CONTROLS
| Tag Number:8812 Model:SF10A | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE 400SA NO SERIAL NUMBER /W CONTROLS AND HYDRAULIC
| Tag Number:8806 Model:400SA | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE 400SA SHELL CORE MACHINE
| Tag Number:8943 Model:400SA | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE MODEL 100S SHELL CORE MACHINE S/N 534
| Tag Number:9211 Model:100S | GRAFTON, OH |
|
|
|
| | |
DEPENDABLE MODEL 200 SHELL CORE MACHINE
| Tag Number:8746 Model:200S | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE MODEL 200FA SHELL CORE MACHINE S/N 87 WITH ALLEN BRADLEY MICROLOGIC PLC
| Tag Number:9264 Model:200FA | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE MODEL 200FA SHELL CORE MACHINE S/N 91 WITH ALLEN BRADEY MICRO LOGIC PLC
| Tag Number:9263 Model:200FA | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE MODEL 200SA SHELL CORE MACHINE NSN HOPPER PER
| Tag Number:7359 Model:200SA | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE MODEL 400SA SHELL CORE MACHINE
| Tag Number:8420 Model:400SA | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE MODEL 400SA SHELL CORE MACHINE
| Tag Number:8673 Model:400SA | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE SHELL CORE MACHINE MODEL 200SA
| Tag Number:7362 Model:200SA | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE300SA SHELL CORE MACHINE
| Tag Number:8944 Model:300SA | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HP 43 SHELL CORE MACHINE WITH PanelView 300 Keypad
| Tag Number:9046 Model:HP43 | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HP42 CORE MACHINE
| Tag Number:8918 Model:HP42 | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HP42 SHELL CORE MACHINE
| Tag Number:7043 Model:HP42 | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HP42 SHELL CORE MACHINE
| Tag Number:7589 Model:HP42 | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HP42 SHELL CORE MACHINE
| Tag Number:8057 Model:HP42 | GRAFTON, OH |
|
|
|
| | |
REDFORD MODEL HP42 SHELL CORE MACHINE S/N 662-259
| Tag Number:7494 Model:HP42 | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HP42G SHELL CORE MACHINE
| Tag Number:7583 Model:HP42G | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HP42G SHELL CORE MACHINE
| Tag Number:8982 Model:HP42 | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HP42G SHELL CORE MACHINE
| Tag Number:8983 Model:HP42 | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HP43A SHELL CORE MACHINE WITH EXTENDED OPENING NO BURNER PLATES
| Tag Number:8922 Model:HP43A | GRAFTON, OH |
|
|
|
 | |
REDFORD MODEL HS22RA SHELL CORE MACHINE S/N HS22RA-879-377 WITH CONTROLS
| Tag Number:9200 Model:HS22RA | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL SCB10 SHELL CORE MACHINE
| Tag Number:8431 Model:SCB10 | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL SCB10 SHELL CORE MACHINE
| Tag Number:8432 Model:SCB10 | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL SCB10 SHELL CORE MACHINE S/N 0692-3641 REBUILT BY EMI WITH ALLEN BRADLEY PLC CONTROLS 1
| Tag Number:7983 Model:SCB10 | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL U 900 SHELL CORE MACHINE W/ ALLEN BRADLEY PLC
MODEL SLC 500
| Tag Number:8942 Model:U900 | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL U180 GAS FIRED SHELL CORE MACHINE S/N 3667 WITH FEED HOPPER
| Tag Number:7573 Model:U180 | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL U180 GAS FIRED SHELL CORE MACHINE S/N 3916
| Tag Number:8157 Model:U180 | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL U180 SHELL CORE MACHINE S/N 3815GL, GAS FIRED, DUAL GAS SYSTEM, GUN DRILLED HEATER PLATESAND CONTROLS
| Tag Number:9266 Model:U180 | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL U180 SHELL CORE MACHINE WITH FEED HOPPER
GUN DRILLED HEATER PLATES S/N 3694-GL
| Tag Number:9272 Model:U180 | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL U180 SHELL CORE MACHINE WITH FEED HOPPER
GUN DRILLED HEATER PLATES S/N 7015-GL
| Tag Number:9271 Model:U180 | GRAFTON, OH |
|
|
DUST COLLECTOR |
|
 | |
DUSTEX PULSE COLLECTOR MDL CJU 800 SN 9223018 5000 CFM
O/A DIMENSIONS 118" TALL WITH 3' LEGS 30" DE
| Tag Number:6357 Model:CJU-800 | GRAFTON, OH |
|
|
|
| | |
UNITED AIR SPECIALIST DUST HOG CARTRIDGE DUST COLLECTOR MODEL SBD 64-4, S/N 60038442 W/ TWIN CITY BLOWER, AND 60HP MOTOR, 22,000 CFM
| Tag Number:1 Model:SBD 64-4 60 HP | DAVENPORT, IA |
|
|
|
| | |
35 GALLON DRUM TYPE DUST COLLECTOR 1/2 HP
| Tag Number:7209 | GRAFTON, OH |
|
|
|
 | |
MIKRO-PULSAIR MODEL 36S.8.30 PULSE DUST COLLECTOR
| Tag Number:9236 Model:36S.8.30 | GRAFTON, OH |
|
|
|
 | |
WHEELABRATOR MODEL 22 WSC-H APPROX. 2000 CFM PULSE DUST COLLECTOR S/N 20-3532-B WITH 5 HP BLOWER AND MOTOR
| Tag Number:9099 Model:22 WSC-H | GRAFTON, OH |
|
|
ELEVATOR |
|
 | |
BUCKET ELEVATOR 13' 4" OVERALL SIZE 2 1/2 " X 3" BUCKETS CASING 18 " X11" 1.5 HP
| Tag Number:7966 | GRAFTON, OH |
|
|
FEEDER |
|
| | |
POWER PULSE PAN FEEDER 12" LONG 1 3/4" WIDE 1" SIDES
| Tag Number:4409 | GRAFTON, OH |
|
|
|
| | |
FLEXICON POWER FEEDER AND HOPPER NO SCREW
| Tag Number:8688.1 Model:SP.TXO2- 140 | GRAFTON, OH |
|
|
|
 | |
VIBRASCREW VERSIFEEDER 1 HP, 74 FT.MIN CAPACITY 13' 6" LONG 4"OUTPUT
| Tag Number:8637 | GRAFTON, OH |
|
|
|
 | |
2003 SCHENCK ACCURATE MODEL MODHC-1V-2A SCREW TYPE HIGH RANGE VOLUMETRIC ADDITIVE FEEDER S/N 73058-01A RATED UP TO 600-650 CU FT WITH 5" FULL PITCH STAINLESS STEEL HELIX SCREW AND NOZZLE 96" LONG, 10 CU FT HOPPER, 2 MOTORS
| Tag Number:8868 Model:MODHC-1V-2A | GRAFTON, OH |
|
|
FURNACE |
|
| | |
1- INDUCTOTHERM MODEL 159-0321-4 NON PCB CAPACITOR RATED AT 1200 KVAR, 1650 VOLT, 300 HZ
| Tag Number:5 Model:159-0321-4 | GRAFTON, OH |
|
|
|
| | |
3- GENERAL ELECTRIC MODEL 16L4KH3 NON PCB CAPACITORS S/N P325005 RATED AT 206 KVAR, 1130 VOLT, 60 HZ, 1 PH
MAX 249 KVAR
PRICED EACH
| Tag Number:2 Model:16L4KH3 | GRAFTON, OH |
|
|
|
| | |
4- GENERAL ELECTRIC MODEL 19L487KH NON PCB CAPACITORS S/N N404291 RATED AT 1200 VOLT, 120 KVAR, 60 HZ
PRICED EACH
| Tag Number:4 Model:19L487KH | GRAFTON, OH |
|
|
|
| | |
45- ABB MODEL CA2002 NON PCB CAPACITORS S/N 938098179 RATED AT 200 KVAR,2 400 VOLT, 60 HZ, 1 PH, 28175KV
PRICED EACH
| Tag Number:6 Model:CA2002 | GRAFTON, OH |
|
|
|
| | |
6- GENERAL ELECTRIC MODEL 19L707KH NON PCB CAPACITORS S/N N432288 RATED AT 750 VOLT, 400 KVAR, 180 HZ, 1 PH
PRICED EACH
| Tag Number:3 Model:19L707KH | GRAFTON, OH |
|
|
|
| | |
6- WESTINGHOUSE NON PCB CAPACITORS MODEL IN2800A35A S/N 84-10-3779 RATED AT 460 VOLT 50 KVAR
PRICED EACH
| Tag Number:1 Model:IN2800A35A | GRAFTON, OH |
|
|
|
| | |
NWL PART # WA367 NON PCB CAPACITORS RATED AT 1100 VAC, 2000 KVAR, 18181 AMPS 600 HZ,
| Tag Number:8947 | GRAFTON, OH |
|
|
|
| | |
NWL PART # WA367 NON PCB CAPACITORS RATED AT 1250VAC, 3000 KVAR,2400 AMPS 600 HZ,
| Tag Number:8947.1 | GRAFTON, OH |
|
|
|
 | |
INDUCTOTHERM 500# FURNACE COIL IN BOX 23 TURNS 3000H
17" OD DIA X 16 " TALL
| Tag Number:7036 | GRAFTON, OH |
|
|
|
| | |
LEEDS & NROTHRUP SPEEDOMAX W/TEMP STICK
| Tag Number:2650 Model:- NONE - | GRAFTON, OH |
|
|
|
| | |
BAC MODEL VXT25CM COOLING TOWER S/N 820020P
| Tag Number:8350 Model:VXT25CM | SOLON, OH |
|
|
|
| | |
NEW 1000# FURNACE CRUCIBLE
| Tag Number:7038 | SOLON, OH |
|
|
|
 | |
NEW SPARE CRUCIBLE FOR 2000# MNP FURNACE TAG 8966 /8967
| Tag Number:8968 | GRAFTON, OH |
|
|
|
 | |
CENTORR MODEL 2H GETTERING FURNACE S/N NH009 WITH OXYGEN MONITOR
| Tag Number:12 Model:2G 100SS | GRAFTON, OH |
|
|
|
 | |
1998 CENTORR TYPE M-60 MULTI-PURPOSE FRONT ACCESS VACUUM HEAT TREAT FURNACE SYSTEM MODEL 3X9 S/N 20350 480 VOLT, 24.1 KW, 8 GPM, 56 PSIG, 1 CFH, 60/90 PSIG EQUIPPED WITH CONTROLS AND 304L STAINLESS STEEL CHAMBER, 3 X 9 HOT ZONE, HONEYWELL TEMPERATUR
Tag Number:4568 Model:M60
| GRAFTON, OH |
|
|
|
 | |
INDUCTOTHERM POWER SUPPLY MODEL 4096 (40KW-9600 HTZ) 1980
| Tag Number:8985 Model:4096 | GRAFTON, OH |
|
|
|
 | |
INDUCTOTHERN POWER SUPPLY MODEL UPF - 9 -25 -10 S/N EJ-6271
25 KW 9600 HZ 400 VOLTS 600 AM
| Tag Number:7568 Model:UPF-9-25-10 | SOLON, OH |
|
|
|
| | |
TRANSFORMER FOR 6950
| Tag Number:6950.5 | GRAFTON, OH |
|
|
|
 | |
LIKE NEW 1994 BONE MODEL TSSL5-1-10 INDUCTION HEATING POWER SUPPLY S/N 200 RATED AT 5 KW, 1-10 KHZ. WITH BUILT IN LOAD STATION
| Tag Number:4569 Model:TSSL5-1-10 | GRAFTON, OH |
|
|
|
 | |
BICKLEY NABER 1000# ELECTRIC RESISTANCE HYDRUALIC TILTING FURANCE WITH POWER SUPPLY S/N 1756
| Tag Number:9213 | GRAFTON, OH |
|
|
|
 | |
LINDBERG 2000# GAS FIRED MOTORIZED NOSE POUR TYPE MELTING FURNACE 9' LONG X 6' 6" WIDE X 7' 6" HIGH WEIGHT 8,500
| Tag Number:8966 | GRAFTON, OH |
|
|
|
| | |
ONE LOT OF INDUCTOTHERM HOSES AND CABLES - 2 PALLETS
|
|
|
| | |
AJAX 200 KW POWER SUPPLY MODEL E-20AP-56-A2NA INCOMING 550/600 VOLT, OUTPUT 480 VOLT, 200KW
| Tag Number:9220 Model:E-20AP-56-A2NA | GRAFTON, OH |
|
|
|
 | |
AJAX 200 KW POWER SUPPLY MODEL E-20AP-56-A2NA S.N 44-1075-11 INCOMING 550/600 VOLT, OUTPUT 480 VOLT, 200KW
| Tag Number:9215 Model:E-20AP-56-A2NA | GRAFTON, OH |
|
|
|
|
| |
AJAX 200 KW POWER SUPPLY MODEL E-20AP-56-A2NA S.N 44-1075-11-A INCOMING 550/600 VOLT, OUTPUT 480 VOLT, 200KW
| Tag Number:9214 Model:E-20AP-56-A2NA | GRAFTON, OH |
|
|
|
| | |
AJAX 200 KW POWER SUPPLY MODEL E-20AP-56-A2NA S.N 44-1075-11-C INCOMING 550/600 VOLT, OUTPUT 480 VOLT, 200KW
| Tag Number:9218 Model:E-20AP-56-A2NA | GRAFTON, OH |
|
|
|
| | |
AJAX 200 KW POWER SUPPLY MODEL E-20AP-56-A2NA S.N 44-1075-11-D INCOMING 550/600 VOLT, OUTPUT 480 VOLT, 200KW
| Tag Number:9216 Model:E-20AP-56-A2NA | GRAFTON, OH |
|
|
|
| | |
AJAX 200 KW POWER SUPPLY MODEL E-20AP-56-A2NA S.N 44-1075-11-E INCOMING 550/600 VOLT, OUTPUT 480 VOLT, 200KW
| Tag Number:9217 Model:E-20AP-56-A2NA | GRAFTON, OH |
|
|
|
| | |
AJAX 200 KW POWER SUPPLY MODEL E-20AP-56-A2NA S.N 44-1075-11-E INCOMING 550/600 VOLT, OUTPUT 480 VOLT, 200KW
| Tag Number:9221 Model:E-20AP-56-A2NA | GRAFTON, OH |
|
|
|
| | |
AJAX 200 KW POWER SUPPLY MODEL E-20AP-56-A2NA S.N 44-1075-11-F INCOMING 550/600 VOLT, OUTPUT 480 VOLT, 200KW
| Tag Number:9219 Model:E-20AP-56-A2NA | GRAFTON, OH |
|
|
|
 | |
AJAX POWER SUPPLY 460 VOLTS INPUT OUTPUT 70/82 KVA
| Tag Number:8748 | GRAFTON, OH |
|
|
|
| | |
INDUCTOTHERM MODEL VIP MARK IV INDUCTION FURNACE,
S/N 76-28-280, POWER SUPPLY 100KW, 3000 HZ, 460 VOLT, 1976
| Tag Number:9005 | GRAFTON, OH |
|
|
|
| | |
PYROMETER FURNACE IMMERSION STICKS, 1 LOT - STICKS ONLY, NO CONTROLLER
| Tag Number:5148 Model:IMMERSION | GRAFTON, OH |
|
|
|
| | |
HUNTERDON KVAR 300, CLASS A, 60HZ, LN VOLTS 750, TEMP RISE 30C, SPEC NO. A1198-6, IMPENDANCE 1.875
| Tag Number:2467 Model:NONE | GRAFTON, OH |
|
|
|
| | |
L&N SPEEDOMAX H FURNACE CHART RECORDER
| Tag Number:4061 Model:SPEEDOMAX H | GRAFTON, OH |
|
|
|
 | |
1998 THERMTRONIX MODEL LSF 900 900# ALUMINUM STATIONARY ELECTRIC RESISTANCE MELTING FURNACE S/N 981490 WITH CONTROLS AND SPARE TOP AND LID, 75 KW
| Tag Number:8993 Model:LSF900 | GRAFTON, OH |
|
|
|
 | |
INDUCTOTHERM MDL ALUMILINE ELECTRIC STATIONARY MELTING SYSTEM SN 90-11497-01360 CAPACITY 1500 LBS ALUMINUM MELT RATE 875 LBS PER HOUR AC POWER 180 KW MANU DATE 1990 REFRACTORY REDONE IN 1999
| Tag Number:6538 Model:ALUMILINE | GRAFTON, OH |
|
|
|
 | |
1994 STAHL MODEL 3000 DDRMV GAS FIRED REVERB FURNACE S/N 94405 WITH CONTROLS AND GAS SYSTEM AND BLOWER
| Tag Number:8775 Model:3000DDRMV | GRAFTON, OH |
|
|
|
 | |
1995 LINDBERG MPH MODEL 62-SCE-12M 12,000# ELECTRIC GLO BAR TYPE FURNACE S/N R-8044 RATED AT 1400 DEGREE F, 10,832# BATH EQUIPPED WITH 250 KVA MODEL 65-0001236 SCR CONTROLLED POWER SUPPLY S/N 1001, LINDBERG MODEL 69-VALCA-40 MOLTEN METAL PUMP SYSTEM
| Tag Number:8751 Model:62-SCE-12M | GRAFTON, OH |
|
|
|
 | |
FRANK W. SCHAFFER MODEL DCM 102 GAS FIRED REVERB FURNACE
| Tag Number:8230 Model:DCM 102 | GRAFTON, OH |
|
|
|
 | |
STAHL MODEL 1500DDR REVERB FURNACE WITH CONTROLS, GAS SYSTEM AND BLOWER
| Tag Number:8773 Model:1500DDR | GRAFTON, OH |
|
|
|
 | |
STAHL MODEL 2000DDR REVERB FURNACE WITH CONTROLS, GAS SYSTEM AND BLOWER
| Tag Number:8774 Model:2000DDR | GRAFTON, OH |
|
|
|
 | |
1000# MCENGLEVAN GAS FIRED DIP OUT TYPE FURNACE WITH GAS SYSTEM AND BLOWER
| Tag Number:8238 | GRAFTON, OH |
|
|
|
 | |
INDUCTOTHERM TRANSITE BOX FURNACE 4,000 LB
| Tag Number:7930 | GRAFTON, OH |
|
|
|
| | |
| Tag Number:6737.1 | SOLON, OH |
|
|
|
 | |
- ELECTRONITE MODEL DT-325 TEMPERATURE INDICATORS 7241.2 SKID OF THERMOCOUPLE TAG# 7241.4
| Tag Number:7241.2 Model:DT-325 | GRAFTON, OH |
|
|
|
| | |
ELECTRO NITE PRINTER, SIZE DP100
| Tag Number:5918 Model:DP-100 | GRAFTON, OH |
|
|
|
| | |
ELECTRONITE TEMPERATURE STICK, MODEL DT200, S/N DT200-A-214
| Tag Number:2645 Model:DT200 | GRAFTON, OH |
|
|
|
| | |
IMMERSION TYPE TEMPERATURE INDICATOR
| Tag Number:4271 | GRAFTON, OH |
|
|
|
| | |
L&N FURNACE TEMP INDICATOR READ - O - MAX DIGITAL W/2 IMMERSING THERMO COUPLES
| Tag Number:6619 | GRAFTON, OH |
|
|
|
| | |
WESTINGHOUSE TRANSFORMER, S/N UAV 6266-01, 4800-890 VOLTS, SINGLE PHASE, CLASS OA, FULL LOAD, 1250K
| Tag Number:2154 Model:- NONE - | GRAFTON, OH |
|
|
|
 | |
30# TRANSITE BOX SAMPLE FURNACE
| Tag Number:5912.7 | GRAFTON, OH |
|
|
|
 | |
AJAX FURNACE TRANSITE BOX 2000 LB CAPACITY STEEL HOIST TILT
| Tag Number:6720 | GRAFTON, OH |
|
|
|
| | |
FURNACE 500# HOIST TILT TRANSITE BOX
| Tag Number:8353 | SOLON, OH |
|
|
|
 | |
INDUCTOTHERM 1000# TRANSITE BOX FURNACE HOIST TILT 12 TURNS
| Tag Number:7034.3 | GRAFTON, OH |
|
|
GRINDER |
|
 | |
U.S. ELECTRICAL MODEL 100 BACK STAND GRINDERS/N 874069, 15 HP, 3" BELTS, 220 VOLTS, 130" BELT
| Tag Number:9019 Model:100 | GRAFTON, OH |
|
|
|
 | |
1 1/2 HP DESIGN LINE BELT GRINDER MODEL 260, S/N 000319, 2" S.E. BELT GRINDER 115/ 240 VOLTS 1PH
| Tag Number:9191 | GRAFTON, OH |
|
|
|
 | |
14" DOUBLE END STAND GRINDER
| Tag Number:8461 | GRAFTON, OH |
|
|
|
 | |
14" DOUBLE END STAND GRINDER
| Tag Number:8462 | GRAFTON, OH |
|
|
|
 | |
14" DOUBLE END STAND GRINDER
| Tag Number:8463 | GRAFTON, OH |
|
|
|
 | |
FOX MODEL 320-53S DOUBLE END GRINDER 10HP WITH SAFETY GUARDS
| Tag Number:9094 Model:320-53S | GRAFTON, OH |
|
|
|
 | |
FOX MODEL 320-53S DOUBLE END GRINDER 10HP WITH SAFETY GUARDS
| Tag Number:9094.2 Model:320-53S | GRAFTON, OH |
|
|
|
 | |
FOX MODEL 420 DOUBLE END PEDESTAL GRINDER UP TO 20" WHEEL 15 HP DRIVE
| Tag Number:8782 Model:420 | GRAFTON, OH |
|
|
|
 | |
FOX MODEL 420 DOUBLE END PEDESTAL GRINDER UP TO 20" WHEEL 15 HP DRIVE
| Tag Number:8785 Model:420 | GRAFTON, OH |
|
|
|
 | |
HAMMOND MODEL 10VRROW DOUBLE END GRINDER S/N 11991
| Tag Number:8778 Model:10VRR0W-B | GRAFTON, OH |
|
|
|
 | |
HAMMOND MODEL 10VRROW DOUBLE END GRINDER S/N 11992
| Tag Number:8777 Model:10VRR0W-B | GRAFTON, OH |
|
|
|
 | |
HAMMOND MODEL 5-VRO DOUBLE END GRINDER 5HP 440 SPINDLE RPM 1500/3000 WITH SMALL TORIT DUST COLLECTOR
| Tag Number:8355 Model:5-VRO | GRAFTON, OH |
|
|
|
 | |
CINCINNATI MODEL 925-710-8 10 HP LEFT HAND SNAP TRAP GRINDER
| Tag Number:8923 Model:925-710-8 | GRAFTON, OH |
|
|
|
 | |
CINCINNATI MODEL 925-710-8 10 HP LEFT HAND SNAP TRAP GRINDER S/N 590-2655
| Tag Number:8924 Model:925-710-8 | GRAFTON, OH |
|
|
|
 | |
CINCINNATI MODEL 925-710-8 10 HP LEFT HAND SNAP TRAP S/N 249917
| Tag Number:8926 Model:925-710-8 | GRAFTON, OH |
|
|
|
 | |
CINCINNATI SINGLE END RIGHT HAND 30" GRINDER
| Tag Number:7615 | GRAFTON, OH |
|
|
|
 | |
STANDARD MODEL 102 30" SINGLE END GRINDER S/N 55052 10 HP DRIVE, RIGHT HAND, 440 VOLT
| Tag Number:7331 Model:102 | GRAFTON, OH |
|
|
|
 | |
US STANDARD MODEL 33VL TYPE 105 30" 10 HP SINGLE END GRINDER S/N 61223 220 VOLT
| Tag Number:7312 Model:33VL | GRAFTON, OH |
|
|
|
 | |
FOX MODEL 18-310 CUP WHEEL 8" OR 9" SWING FRAME GRINDER
15HP 230/460 VOLTS
| Tag Number:8485 Model:18-310 | GRAFTON, OH |
|
|
|
 | |
FOX MODEL 18-310 CUP WHEEL 8" OR 9" SWING FRAME GRINDER ( NO ) SPINDLE ASSEMBLY 15HP 230/460 VOLTS S/N 7986386
| Tag Number:8489 Model:18-310 | GRAFTON, OH |
|
|
|
| | |
FOX MODEL 18-310 CUP WHEEL 8" OR 9" SWING FRAME GRINDER ( NO ) SPINDLE ASSEMBLY 15HP 230/460 VOLTS S/N 7986378
| Tag Number:8486 Model:18-310 | GRAFTON, OH |
|
|
|
 | |
FOX MODEL 18-310 CUP WHEEL 8" OR 9" SWING FRAME GRINDER ( NO ) SPINDLE ASSEMBLY 15HP 230/460 VOLTS S/N 7986389
| Tag Number:8484 Model:18-310 | GRAFTON, OH |
|
|
|
 | |
FOX MODEL 18-310 CUP WHEEL 8" OR 9" SWING FRAME GRINDER
15HP 230/460 VOLTS S/N 7986377
| Tag Number:8488 Model:18-310 | GRAFTON, OH |
|
|
|
 | |
FOX MODEL 18-310 CUP WHEEL 8" OR 9" SWING FRAME GRINDER
15HP 230/460 VOLTS S/N 7986380
| Tag Number:8483 Model:18-310 | GRAFTON, OH |
|
|
|
 | |
FOX MODEL 18-310 CUP WHEEL 8" OR 9" SWING FRAME GRINDER
15HP 230/460 VOLTS S/N 7986382
| Tag Number:8487 Model:18-310 | GRAFTON, OH |
|
|
|
| | |
VARIABLE SPEED PULLEY
| Tag Number:3767.2 | GRAFTON, OH |
|
|
HEATER |
|
 | |
CARVER SAND HEATER SIZE NO. 2 SN 2608 MFG 1/78 WITH CONTROLS RATED @ 300- 600 LBS PER MINUTE
| Tag Number:7632 Model:2 | GRAFTON, OH |
|
|
|
 | |
CASTEC MODEL 200-45KW-480 LP SAND HEATER W/ CONTROLS S/N C-3LP-006
| Tag Number:9101.1 Model:200-45KW | GRAFTON, OH |
|
|
|
 | |
CASTEC MODEL 300-60-480V LOW PROFILE SAND HEATER S/N C-3PL-007 5/1993
| Tag Number:9101.4 Model:ECH 300 | GRAFTON, OH |
|
|
|
| | |
CE CAST CONTROLS FOR SAND HEATER, 45KW
| Tag Number:3646.1 Model:CONTROLS | GRAFTON, OH |
|
|
|
 | |
CE CAST MODEL ECH600 SAND HEATER NO CONTROLS
| Tag Number:8365 Model:ECH600/90KW | GRAFTON, OH |
|
|
|
 | |
CE CAST MODEL ECH 200 SAND HEATER 45KW 240 VOLTS
| Tag Number:8666 Model:ECH200 | GRAFTON, OH |
|
|
|
| | |
CE CAST SAND HEATER 300# PER MINUTE 60KW WITH CONTROL
| Tag Number:8379 Model:300-60KW | GRAFTON, OH |
|
|
|
 | |
CE CAST SAND HEATER MODEL ECH600/90KW NO CONTROLS
| Tag Number:6851 Model:ECH600/90KW | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE ELECTRIC SAND HEATER 45 KW S/N 237 PART OF TAG# 6898
| Tag Number:6899 Model:DSH18-4 | GRAFTON, OH |
|
|
|
 | |
DEPENDABLE MODEL DSH 18-8 90 KW WITH CONTROLS
| Tag Number:7857 Model:DSH18-8 | GRAFTON, OH |
|
|
|
| | |
DEPENDABLE SAND HEATER CONTROL PANEL ONLY
| Tag Number:3470 Model:SAND HEATER | GRAFTON, OH |
|
|
|
 | |
KLEIN HEATER/COOLER EQUIPPED WITH CONTROLS AND BOILERS
| Tag Number:30 | GRAFTON, OH |
|
|
|
|
| |
KLEIN HEATER/COOLER EQUIPPED WITH CONTROLS AND BOILERS
| Tag Number:31 | GRAFTON, OH |
|
|
|
 | |
KLOSTER MODEL 2000# MIN SAND HEATER S/N 7384 WITH CONTROLS AND BLOWER
| Tag Number:9231 Model:2000# | GRAFTON, OH |
|
|
|
 | |
WAX HEATER
| Tag Number:7971 | GRAFTON, OH |
|
|
LADLE |
|
| | |
MODERN 24" X 24" CYLINDRICAL LADLE WITH SQUARE BAIL
| Tag Number:6959 | GRAFTON, OH |
|
|
|
| | |
MIDMARK DUCTILE LADLE WITH LID 36 X 46 GEARED WITH BALE 4000#
| Tag Number:5301 | GRAFTON, OH |
|
|
|
 | |
MODERN 20" DIA. X 37" GEARED DUCTILE LADLE
| Tag Number:7491 | GRAFTON, OH |
|
|
|
| | |
MODERN DUCTILE LADLE 22" DIA X 36"
| Tag Number:9075 | GRAFTON, OH |
|
|
|
 | |
MODERN DUCTILE LADLE SN 1096029 GEARED 23"X45"
| Tag Number:5915 Model:23"X45" | GRAFTON, OH |
|
|
|
 | |
27" X 38" D MODERN GEARED LIP POUR LADLE WITH BAIL
| Tag Number:9182 | GRAFTON, OH |
|
|
|
|
| |
27" X 38" D MODERN GEARED LIP POUR LADLE WITH BAIL
| Tag Number:9181 | GRAFTON, OH |
|
|
|
 | |
29 X 36 GEARED LIP POUR LADLE WITH BAIL
| Tag Number:8649 | GRAFTON, OH |
|
|
|
 | |
54" X 68" DEEP GEARED LIP POUR LADLE
|
|
|
 | |
MODERN 19" X 19" GEARED LIP POUR LADLE
| Tag Number:8457.1 Model:A | GRAFTON, OH |
|
|
|
 | |
MODERN 19" X 19" GEARED LIP POUR LADLE
| Tag Number:8457.4 | GRAFTON, OH |
|
|
|
 | |
MODERN 19" X 19" GEARED LIP POUR LADLE
| Tag Number:8457.5 | GRAFTON, OH |
|
|
|
 | |
MODERN 19" X 19" GEARED LIP POUR LADLE
| Tag Number:8457.6 | GRAFTON, OH |
|
|
|
| | |
MODERN GEARED LADLE 26" DIA. 37" TALL SQUARE BAIL
| Tag Number:7474 | GRAFTON, OH |
|
|
|
 | |
MODERN GEARED LIP POUR LADLE 28" DIAMETER X 31" HIGH MOTORIZED WITH .33 HP DRIVE, SQUARE BAIL WITH L
| Tag Number:7383 | GRAFTON, OH |
|
|
|
 | |
MODERN GEARED TREATMENT AND TRANSFER LIP POUR LADLE, 26" X 34" D
| Tag Number:9197 | GRAFTON, OH |
|
|
|
 | |
MODERN GEARED TREATMENT AND TRANSFER LIP POUR LADLE, 26" X 34" D
| Tag Number:9196 | GRAFTON, OH |
|
|
|
 | |
23 1/2 X 23 1/2 GEARED TEAPOT LADLE WITH BAIL
| Tag Number:9179 | GRAFTON, OH |
|
|
|
|
| |
23 1/2 X 23 1/2 GEARED TEAPOT LADLE WITH BAIL
| Tag Number:9180 | GRAFTON, OH |
|
|
|
 | |
IE 24" X 32" MOTORIZED TUNDISH LADLE
| Tag Number:8211 | GRAFTON, OH |
|
|
|
 | |
IE 24" X 32" MOTORIZED TUNDISH LADLE S/N 5242T
| Tag Number:8194 | GRAFTON, OH |
|
|
MIXER |
|
 | |
MULLER 31/2 CF CEMENT MIXER
| Tag Number:8357 | GRAFTON, OH |
|
|
|
 | |
CE CAST MODEL CEL600 CONTINUOUS MIXER WITH TWO PUMPS
| Tag Number:7440 Model:CEL600 | GRAFTON, OH |
|
|
|
 | |
KLOSTER MODEL TYPE II 2000# CONTINUOUS MIXER S/N MS-7377 WITH CONTROLS AND PUMPS
| Tag Number:9230 Model:TYPE1 I 2000# | GRAFTON, OH |
|
|
|
| | |
OMCO CONTINUOUS MIXER WITH PLC CONTROLS
| Tag Number:8675 | GRAFTON, OH |
|
|
|
 | |
STRONG SCOTT MODEL ST 200 CONTINUOUS MIXER OFF REDFORD
CB-22-SA
| Tag Number:7751.7 Model:ST200 | GRAFTON, OH |
|
|
|
 | |
STRONG SCOTT MODEL ST-1000 20 HP. 1000# PER MINUTE CONTINUOUS MIXER S/N 164
| Tag Number:8536 Model:ST1000 | GRAFTON, OH |
|
|
|
| | |
STRONG SCOTT MODEL ST200 CONTINUOUS MIXER WITH 3 PUMPS
| Tag Number:8668 Model:ST200 | GRAFTON, OH |
|
|
|
| | |
LIGHTENING MODEL XJ-30VM CORE WASH MIXERS S/N 95/E34673-1
| Tag Number:8653.3 Model:XJ-30VM | GRAFTON, OH |
|
|
|
| | |
LIGHTENING MODEL XJ-33VM CORE WASH MIXER S/N 81-102530
| Tag Number:8653.1 Model:DM-2 | GRAFTON, OH |
|
|
|
 | |
CARVER 2CG MIXER
| Tag Number:8833 Model:2CG | GRAFTON, OH |
|
|
|
 | |
KLEIN MODEL VSM-122 DUAL SAND MIXER WITH 2 PUMPS, COMMON CONTROLS, DRW# W101D244
| Tag Number:32 Model:VSM122 | GRAFTON, OH |
|
|
|
 | |
KLEIN MODEL VSM-122 DUAL SAND MIXER WITH 2 PUMPS, COMMON CONTROLS, DRW# W101D244
| Tag Number:33 Model:VSM122 | GRAFTON, OH |
|
|
MOLDING |
|
 | |
1989 HUNTER MODEL HMP 20C AUTOMATIC MOLDING MACHINE 20X24 OPP EQUIPPED WITH PANELMATE TOUCHPAD, SAFE SCAN PROTECTION S/N89D1027 WITH DEEP FLASK 8 1/2 OVER 7 1/2
| Tag Number:8937 Model:HMP20C | GRAFTON, OH |
|
|
|
 | |
COMPLETE DISAMATIC MODEL 2070 AUTOMATIC MOLDING LINE INCLUDING SURGE HOPPER, FEED BELT WITH AIRATOR, DISAMATIC MODEL 2070 B SIZE MOLDING MACHINE S/N DMM85.3030 WITH CORE SETTER, PATTERN CHANGER, PMC AND AMC CONVEYORS, CORE SETTING ROBOT INNOCULATION
| Tag Number:1 Model:2070B | CLEVELAND, OH |
|
|
|
 | |
HUNTER AUTOMATIC MATCHPLATE MOLDING MACHINE HMP20 SERIAL NO A74-A573 MANU YEAR 1974
| Tag Number:6750 Model:HMP20 | GRAFTON, OH |
|
|
|
 | |
HUNTER MODEL HMP 20 C AUTOMATIC MOLDING MACHINE S/N A83P937 WITH DEEP FLASK 8 1/2 OVER 7 1/2
| Tag Number:8939 Model:HMP20C | GRAFTON, OH |
|
|
|
 | |
HUNTER MODEL HMP 20 SN A74 A550
| Tag Number:6167 Model:HMP20 | GRAFTON, OH |
|
|
|
 | |
HUNTER MODEL HMP 20C AUTOMATIC MOLDING MACHINE S/N A82P820 WITH GE FANUC PLC CONTROLS WITH DEEP FLASK 8 1/2 OVER 7 1/2
| Tag Number:8521 Model:HMP20C | GRAFTON, OH |
|
|
|
| | |
HARTMAN 16" X 22" CHATTER GATE WITH CYLINDERS
| Tag Number:8935 | GRAFTON, OH |
|
|
|
| | |
HARTMAN 16" X 22" CHATTER GATE WITH CYLINDERS
| Tag Number:8935.1 | GRAFTON, OH |
|
|
|
| | |
HARTMAN 16" X 22" CHATTER GATE WITH CYLINDERS
| Tag Number:8935.2 | GRAFTON, OH |
|
|
|
| | |
HARTMAN 16" X 22" CHATTER GATE WITH CYLINDERS
| Tag Number:8935.3 | GRAFTON, OH |
|
|
|
 | |
HARTMAN 24" X 30" CHATTER GATE WITH CYLINDERS
| Tag Number:8936.1 | GRAFTON, OH |
|
|
|
 | |
HARTMAN 24" X 30" CHATTER GATE WITH CYLINDERS
| Tag Number:8936.2 | GRAFTON, OH |
|
|
|
 | |
HARTMAN 24" X 30" CHATTER GATES WITH CYLINDERS
CYLINDERS ARE ON THE 24" SIDE
| Tag Number:8936 | GRAFTON, OH |
|
|
|
 | |
COMPACTION TABLE 48" X 48"
| Tag Number:7933 | GRAFTON, OH |
|
|
|
 | |
GK MODEL HDCT 120.10 COMPACTION TABLE 9'6" WIDE 8'7" LONG
S/N C 8298-1, 4 DRIVES
| Tag Number:9232 Model:HDCT 120.10 | GRAFTON, OH |
|
|
|
 | |
BMM CK SQUEEZER 500 LB JOLT CAPACITY TABLE 25" X 20"
| Tag Number:9058 Model:CK | GRAFTON, OH |
|
|
|
 | |
BMM CK SQUEEZER SERIAL V1623 SR8498 500 LB JOLT CAPACITY TABLE 25" X 20"
| Tag Number:6723 Model:CK | GRAFTON, OH |
|
|
|
 | |
BMM JOLT SQUEEZE MOLDING MACHINE MODEL BQ1-V1284
S/N SR 4143, WITH CONTROL PANEL #2864
| Tag Number:2862 Model:BQ1V1284 | GRAFTON, OH |
|
|
|
 | |
BMM MODEL BQ1 MOLDING MACHINE, S/N SR4320 - CONTROLS TAG NO2863
| Tag Number:2861 Model:BQ1V1284 | GRAFTON, OH |
|
|
|
 | |
BMM MODEL QCK MOLDING MACHINE
| Tag Number:8803 Model:CK | GRAFTON, OH |
|
|
|
| | |
OSBORN MODEL 212 MOLDING MACHINE
| Tag Number:8804 Model:214 R | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 212 R MOLDING MACHINE S/N 17695H
| Tag Number:6008.7 Model:212 R | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 212 RJW MOLDING MACHINE
| Tag Number:9057 Model:212RJW | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 212 RJW MOLDING MACHINE S/N 212-20-85
| Tag Number:8412 Model:212RJW | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 212RJW JOLT SQUEEZE MOLDING MACHINE S/N 9212J
| Tag Number:7261 Model:212RJW | GRAFTON, OH |
|
|
|
| | |
OSBORN MODEL 214R JOLT SQUEEZE MOLDING MACINE S/N 17511H
| Tag Number:6989 Model:214R | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 275-J JOLT SQUEEZE MOLDING MACHINE
| Tag Number:8632 Model:275J | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 275-J JOLT SQUEEZE MOLDING MACHINE
| Tag Number:8631 Model:275J | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 275-J JOLT SQUEEZE MOLDING MACHINE
| Tag Number:8629 Model:275J | GRAFTON, OH |
|
|
|
|
| |
OSBORN MODEL 275-J JOLT SQUEEZE MOLDING MACHINE
| Tag Number:8628 Model:275J | GRAFTON, OH |
|
|
|
 | |
BM MODEL QCT-2 MOLDING MACHINE S/N DH5720 MODEL V2372 WITH CONTROLS
| Tag Number:7701 Model:QCT-2 | GRAFTON, OH |
|
|
|
 | |
BMM MODEL QCT-2 MOLDING MACHINE S/N DH5433 MODEL V2372 WITH CONTROLS
| Tag Number:7700 Model:QCT-2 | GRAFTON, OH |
|
|
|
 | |
SPO MODEL 9646 JOLT SQUEEZE ROLLOVER DRAW MOLDING MACHINE S/N 148
| Tag Number:8684 Model:9646 | GRAFTON, OH |
|
|
|
| | |
LOT OF NEW AND REBUILT BMM PARTS FOR CT3, BT5 MOLDING MACHINES
| Tag Number:9 Model:VARIOUS | GRAFTON, OH |
|
|
|
 | |
12 X 18 STAHL PERMENENT MOLD MACHINE
| Tag Number:9024 Model:12X18 | GRAFTON, OH |
|
|
|
 | |
12X 18 STAHL PERMENENT MOLD MACHINE
| Tag Number:9027 Model:12X18 | GRAFTON, OH |
|
|
|
 | |
12X 18 STAHL PERMENENT MOLD MACHINE
| Tag Number:9025 Model:12X18 | GRAFTON, OH |
|
|
|
 | |
18 X 24 STAHL PERMENENT MOLD MACHINE S/N 6466-20
| Tag Number:9030 Model:18X24 | GRAFTON, OH |
|
|
|
 | |
18 X 24 STAHL PERMENENT MOLD MACHINE S/N 65122-16
| Tag Number:9029 Model:18X24 | GRAFTON, OH |
|
|
|
 | |
18 X 24 STAHL PERMENENT MOLD MACHINE S/N 65134-16
| Tag Number:9023 Model:18X24 | GRAFTON, OH |
|
|
|
|
| |
18 X 24 STAHL PERMENENT MOLD MACHINE S/N 65195-12
| Tag Number:9022 Model:18X24 | GRAFTON, OH |
|
|
|
 | |
18X24 STAHL PERMENENT MOLD MACHINE
| Tag Number:9026 Model:18X24 | GRAFTON, OH |
|
|
|
 | |
24 X 30 STAHL PERMENENT MOLD MACHINE S/N 68211-28
| Tag Number:9031 Model:24X30 | GRAFTON, OH |
|
|
|
| | |
CONTROLS FOR STAHL OR HALL MOLDING MACHINE
| Tag Number:8767 | GRAFTON, OH |
|
|
|
 | |
HALL/STAHL MODEL HM3 SWE 32" X 38" PERMANENT MOLDING MACHINE S/N 88690 NO HYDRAULIC UNIT
NOTE: SECOND CYLINDER AND MOUNTING PLATE ARE BY THE MACHINE
| Tag Number:8970 Model:HM3SWE | GRAFTON, OH |
|
|
|
 | |
STAHL 24 X 30 PERMENENT MOLDING MACHINE
| Tag Number:9032 Model:24X30 | GRAFTON, OH |
|
|
|
 | |
STAHL MODEL 1824 PERMANENT MOLDING MACHINE NO HYDRAULIC UNIT
| Tag Number:8971 Model:18X24 | GRAFTON, OH |
|
|
|
 | |
STAHL MODEL 1824 PERMANENT MOLDING MACHINE NO HYDRAULIC UNIT
| Tag Number:8972 Model:18X24 | GRAFTON, OH |
|
|
|
 | |
STAHL MODEL 1824 PERMANENT MOLDING MACHINE NO HYDRAULIC UNIT
| Tag Number:8974 Model:18X24 | GRAFTON, OH |
|
|
|
 | |
STAHL MODEL 1824 PERMANENT MOLDING MACHINE NO HYDRAULIC UNIT
| Tag Number:8973 Model:18X24 | GRAFTON, OH |
|
|
|
 | |
STAHL SP 1824 PERMENENT MOLDING MACHINE WITH HYDRAULIC UNIT
| Tag Number:8234 Model:SP 18X24 | GRAFTON, OH |
|
|
|
 | |
STAHL UNITROL FOR PERMANENT MOLDING MACHINE MODEL D10-VPV-32
| Tag Number:9043.1 Model:D10-VPV-32 | GRAFTON, OH |
|
|
|
 | |
STAHL UNITROL FOR PERMANENT MOLDING MACHINE MODEL D10-VPV-32
| Tag Number:9043.2 Model:D10-VPV-32 | GRAFTON, OH |
|
|
|
 | |
STAHL UNITROL FOR PERMANENT MOLDING MACHINE MODEL D10-VPV-32
| Tag Number:9043.3 Model:D10-VPV-32 | GRAFTON, OH |
|
|
|
 | |
STAHL UNITROL FOR PERMANENT MOLDING MACHINE MODEL D10-VPV-32
| Tag Number:9043.4 Model:D10-VPV-32 | GRAFTON, OH |
|
|
|
 | |
STAHL UNITROL FOR PERMANENT MOLDING MACHINE MODEL D5-VPV-22
| Tag Number:9043.5 Model:D5-VPV-22 | GRAFTON, OH |
|
|
|
 | |
STAHL UNITROL FOR PERMANENT MOLDING MACHINE MODEL U15VOU3-10-2-1 S/N 74310
| Tag Number:8771 | GRAFTON, OH |
|
|
|
 | |
STAHL UNITROL FOR PERMANENT MOLDING MACHINE MODEL U15VOU3-10-2-1 S/N 75349
| Tag Number:8768 | GRAFTON, OH |
|
|
|
 | |
STAHL UNITROL FOR PERMANENT MOLDING MACHINE MODEL V15VPV31021 15 HP
| Tag Number:9043 Model:V15VPV31021 | GRAFTON, OH |
|
|
|
 | |
STAHL UNITROL FOR PERMANENT MOLDING MACHINE OLD STYLE SET UP FOR DUAL OPERATION
| Tag Number:8769 | GRAFTON, OH |
|
|
|
| | |
1999 SHALCO MODEL 1520 PIN BONDER WITH GLUE APPLICATOR
| Tag Number:8565.1 Model:1520 | GRAFTON, OH |
|
|
|
| | |
1999 SHALCO MODEL 1520 PIN BONDER WITH GLUE APPLICATOR
| Tag Number:8565.2 Model:1520 | GRAFTON, OH |
|
|
|
| | |
1999 SHALCO MODEL 1520 PIN BONDER WITH GLUE APPLICATOR
| Tag Number:8565.3 Model:1520 | GRAFTON, OH |
|
|
|
| | |
1999 SHALCO MODEL 1520 PIN BONDER WITH GLUE APPLICATOR
| Tag Number:8565.4 Model:1520 | GRAFTON, OH |
|
|
|
| | |
1999 SHALCO MODEL 1520 PIN BONDER WITH GLUE APPLICATOR
| Tag Number:8565.5 Model:1520 | GRAFTON, OH |
|
|
|
| | |
1999 SHALCO MODEL 1520 PIN BONDER WITH GLUE APPLICATOR
| Tag Number:8565.6 Model:1520 | GRAFTON, OH |
|
|
|
| | |
SHALCO 1520 PIN BONDER
| Tag Number:7076 Model:1520 | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL 2030SBM PIN BONDER
| Tag Number:8175 Model:2030SBM | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL 2030SBM PIN BONDER S/N SBM2GR25A58
| Tag Number:8173 Model:2030SBM | GRAFTON, OH |
|
|
|
 | |
SHALCO PIN BONDER 15" X 20"
| Tag Number:8609 Model:1520 | GRAFTON, OH |
|
|
|
 | |
SHELL PROCESS PIN BONDER MODEL SBM2, S/N 291, 15 X 20 BONDER
| Tag Number:9167 Model:SMB2 | GRAFTON, OH |
|
|
|
|
| |
SHELL PROCESS PIN BONDER MODEL SBM2, S/N 383, 15 X 20 BONDER
| Tag Number:9166 | GRAFTON, OH |
|
|
|
| | |
1991 B AND P MODEL 6030H 6000# HYDRAULIC MOLD ROLLOVER S/N 449-9110 WITH POWERED OUTFEED
| Tag Number:8997 Model:6030H | GRAFTON, OH |
|
|
|
 | |
B & P MODEL 9030H ROLADRAW MOLD ROLLOVER WITH CONTROLS AND HYDRAULICS
| Tag Number:7042 Model:9030H | GRAFTON, OH |
|
|
|
 | |
B AND P MODEL 4025H 4000# HYDRAULIC MOLD ROLLOVER S/N HRD3406905 WITH HYDRAULIC SYSTEM
| Tag Number:9265 Model:4025H | GRAFTON, OH |
|
|
|
| | |
B AND P MODEL 6030H 6000# HYDRAULIC MOLD ROLLOVER NSN WITH POWERED OUTFEED
| Tag Number:8996 Model:6030H | GRAFTON, OH |
|
|
|
 | |
B& P MODEL NCR-3014 CORE ROLLOVER S/N 271-720 WITH TAG# 7381.1 HYDRUALIC SYSTEM
| Tag Number:7381 Model:NCR-3014 | GRAFTON, OH |
|
|
|
 | |
BEARDSLEY & PIPER HYDRAULIC ROLLOVER MDL 10032H SERIAL NO. HRD 335 6901 WITH CONTROL PANEL (NO HYDRA
| Tag Number:6796 Model:10032H | GRAFTON, OH |
|
|
|
 | |
INLINE BARREL TYPE ROLLOVER WITH ROLLERS 33" WIDE X 7' LONG DRAW OPENING 9" MIN 30"MAX
| Tag Number:8438 | GRAFTON, OH |
|
|
|
 | |
INTERNATIONAL HYDRUALIC MOLD ROLLOVER MODEL AN-H S/N A-22316 SIZE 40 " X 20"
| Tag Number:8704 Model:AN-H | GRAFTON, OH |
|
|
|
 | |
INTERNATIONAL MODEL REDP 30" X 30" X12" BARREL TYPE CLAMP ROLLOVER DRAW MACHINE S/N A-30410
| Tag Number:8436 Model:REDP | GRAFTON, OH |
|
|
|
 | |
INTERNATIONAL MODEL TYPE CR-H SIZE 2000# WITH 30" ROLLORS
68" LONG
| Tag Number:8476 Model:CR-H | GRAFTON, OH |
|
|
|
 | |
INTERNATIONAL MODEL 16" PVTJS ROTOLIFT LIFT MOLDING MACHINE WITH HANDLER S/NB- 3784-1
| Tag Number:9189 Model:PVTJS16 | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 3161 ROTOLIFT S/N 14397-D NO HANDLER
| Tag Number:8724 Model:3161 | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 3161 ROTOLIFT S/N 19174-A NO HANDLER
| Tag Number:9188 Model:3161-8 | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 3191 RJW SEMI AUTOMATIC MOLDING MACHINE S/N 19071E WITH MATCHPLATE HANDLER
| Tag Number:9212 Model:3191 RJW | GRAFTON, OH |
|
|
|
 | |
OSBORN MODEL 3191-8 ROTOLIFT NO MATCHPLATE HANDLER S/N 16045-B
| Tag Number:8820 Model:3191-8 | GRAFTON, OH |
|
|
|
 | |
1999 SHALCO MODEL DSM-3 SHELL MOLDING MACHINE WITH 2- OVENS, ALLEN BRADLEY PLC CONTROLS AND HYDRAULIC SYSTEM
| Tag Number:8566 Model:DSM-3 | GRAFTON, OH |
|
|
|
 | |
1999 SHALCO MODEL DSM-3 SHELL MOLDING MACHINE WITH 2- OVENS, ALLEN BRADLEY PLC CONTROLS AND HYDRAULIC SYSTEM
| Tag Number:8569 Model:DSM-3 | GRAFTON, OH |
|
|
|
 | |
1999 SHALCO MODEL DSM-3 SHELL MOLDING MACHINE WITH 2- OVENS, ALLEN BRADLEY PLC CONTROLS AND HYDRAULIC SYSTEM
| Tag Number:8570 Model:DSM-3 | GRAFTON, OH |
|
|
|
 | |
SHALCO MODEL 2030SMM 20" X 30" SHELL MOLDING MACHINE S/N 9100
| Tag Number:7077 Model:2030SMM | GRAFTON, OH |
|
|
|
 | |
SHALCO SHELL MOLDING MACHINE, MODEL 2640 WITH PICKOFF AND FEED
| Tag Number:7376 | GRAFTON, OH |
|
|
|
| | |
CLEVELAND PRODUCTS 8 STATION NO BAKE TURNTABLE 20' DIA WITH 8 - 48" WIDE DISCHARGE CONVEYORS 3.5" DI
| Tag Number:6854 | GRAFTON, OH |
|
|
MULLER |
|
 | |
B AND P MODEL 100B HEAVY DUTY BATCH SPEEDMULLER WITH DUST HOOD AND 200 HP MOTOR GEAR BOX MODEL 64756 S/N X 1207
| Tag Number:8882 Model:100B | GRAFTON, OH |
|
|
|
|
| |
B AND P MODEL 100B HEAVY DUTY BATCH SPEEDMULLER WITH DUST HOOD AND 200 HP MOTOR GEAR BOX MODEL 64756 S/N X1231
| Tag Number:8881 Model:100B | GRAFTON, OH |
|
|
|
 | |
B AND P MODEL 100B SPEEDMULLER WITH DRIVE 200 HP
| Tag Number:9001 Model:100B | GRAFTON, OH |
|
|
|
 | |
B&P MULBARO WITH LIKE NEW TIRES
| Tag Number:9128 Model:MULBARO | GRAFTON, OH |
|
|
|
| | |
B&P MODEL 100B SPEED MULLER WITH 200 HP DRIVE AND GEAR BOX MODEL 64756-100B S/N U-0655-150 CHGP
| Tag Number:8792 Model:100B | GRAFTON, OH |
|
|
|
 | |
B&P MODEL 100B SPEED MULLER WITH 200 HP DRIVE AND GEAR BOX MODEL L64-756-L-EX S/N R-4222-230
| Tag Number:8791 Model:100B | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 1.5F BATCH MULLER WITH DUST HOOD GEAR BOX MODEL SM 1 1.5F-1
RATIO 25.40 S/N 7-166- 594-01-3
| Tag Number:8514 Model:1.5F | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 1-1/2F BATCH MULLER S/N EP111892 GEAR BOX
MODEL SN 1 1/2F -1
| Tag Number:8242 Model:1.5F | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 1-1/2G BATCH MULLER S/N E212173 GEAR BOX
MODEL SM 1 1/2 F -1 RATIO 25.40 MO# 6-965592-01-11
| Tag Number:8241 Model:1.5G | GRAFTON, OH |
|
|
|
| | |
SIMPSON MODEL 1F BATCH MULLER ( NO WHEELS ) S/N E7201001 WITH DUST HOOD
| Tag Number:7964 Model:1F | GRAFTON, OH |
|
|
|
| | |
SIMPSON MODEL 1F SAND MULLER S/N E15627
| Tag Number:9073 Model:1F | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 1G MULLER S/N 207363
| Tag Number:9244 Model:1G | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 2.5 G MULLER WITH DRIVE S/N E7202004
| Tag Number:8471 Model:2.5G | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 2F MULLER FALK GEAR BOX 8SM2F MO# 604-224 RATIO 32.39.1 30 HP 220/440 S/N EP85827
| Tag Number:9067 Model:2F | GRAFTON, OH |
|
|
|
 | |
STATES MODEL M2500 RING MULLER S/N M2500-205-60-2- EQUIPPED WITH SLC-5 PLC CONTROLS AND SPARE PARTS
| Tag Number:8755 Model:M2500 | GRAFTON, OH |
|
|
|
| | |
CARLSON AIR CLUTCH FOR 22G MULLER 16" DIA. AND 100HP MOTOR
| Tag Number:9089 | GRAFTON, OH |
|
|
|
 | |
NEW IN BOX NEXEN AIR CLUTCH MODEL R964126 24" DIA 3.375 BORE /NECO# 2200 S/N 160Z788
| Tag Number:8839 Model:R964126 | GRAFTON, OH |
|
|
|
 | |
1995 SIMPSON CONTINUOUS MULLER MODEL 22G S/N 9507004 WITH AIR DOOR AND MOTOR
| Tag Number:8875 Model:22G | GRAFTON, OH |
|
|
|
|
| |
1999 SIMPSON CONTINUOUS MULLER MODEL 22G S/N 9907001 WITH AIR DOOR AND MOTOR
| Tag Number:8874 Model:22G | GRAFTON, OH |
|
|
|
 | |
SIMPSON CONTINUOUS MULLER MODEL 225G 150 HP DRIVE WITH DUST HOOD
| Tag Number:8877 Model:225G | GRAFTON, OH |
|
|
|
 | |
SIMPSON CONTINUOUS MULLER MODEL 23G S/N 99-07002 GEAR BOXES RATIO 34.20 MODEL 10SM 3F2 -002 MO# 97-066146-01
MODEL 10SM 3F -B MO# 99-066308-01 WITH 200 HP MOTOR AND CLUTCH
| Tag Number:9103 Model:23G | GRAFTON, OH |
|
|
|
 | |
2- HARTLEY MODEL 2500 -215-21 COMPACTABILITY UNITS S/N 2500-255 FOR 2- 100B MULLER WITH COMMON MODEL B-18 PC-1334 CONTROL S/N 18PC-462
| Tag Number:9123 Model:18PC | GRAFTON, OH |
|
|
|
 | |
DIETERT COMPACTABILITY CONTROLLER FOR 26G MULLER WITH CONTROLS
| Tag Number:8880 | GRAFTON, OH |
|
|
|
 | |
DIETERT COMPACTABILITY CONTROLS AND TEST UNIT FOR 26G MULLER
| Tag Number:8879 | GRAFTON, OH |
|
|
|
| | |
DIETERT MOLDABILITY CONTROL, PAN CONVEYOR AND SCREW, CONTROL PANEL
| Tag Number:8607 | GRAFTON, OH |
|
|
|
 | |
HARTLEY MODEL 2550-101-5 COMPACTABILITY UNIT S/N 2550-199
FOR 100B MULLER WITH MODEL18 PC- 1305 CONTROL S/N 18PC-456
| Tag Number:9124 Model:2550 | GRAFTON, OH |
|
|
|
 | |
HARTLEY MODEL 2550-101-5 COMPACTABILITY UNIT S/N 2550-199
FOR 100B MULLER WITH MODEL18 PC- 1305 CONTROL S/N 18PC-456
| Tag Number:9125 Model:2550 | GRAFTON, OH |
|
|
|
| | |
HARTLEY MODEL 2502 COMPACTABILITY CONTROLS FOR 100B MULLER WITH COMMON CONTROL AND ALLEN BRADLEY PLC
| Tag Number:8884 Model:2502 | GRAFTON, OH |
|
|
|
 | |
HARTLEY MODEL 2550 COMPACTABILITY CONTROLS FOR 100B MULLER
WITH MODEL D-18 PC- 860 CONTROL S/N 18PC-356
| Tag Number:8792.1 Model:2550 | GRAFTON, OH |
|
|
|
 | |
HARTLEY MODEL 2550 COMPACTABILITY CONTROLS FOR 100B MULLER
WITH MODEL D-18 PC- 860 S/N 18PC-357 AND ALLEN BRADLEY PLC5/15 CONTROL
| Tag Number:8791.1 Model:2550 | GRAFTON, OH |
|
|
|
 | |
HARTLEY MODEL 2550 COMPACTABILITY UNIT WITH MODEL18 MK2 PC CONTROL S/N 18MK2-600 CONTROLS HAS TWO DISPLAYS
| Tag Number:9247 Model:2550 | GRAFTON, OH |
|
|
|
 | |
B&P 100B GEAR BOX MODEL 64756-L S/N D1198 RATIO 17.164.1
REBUILT 8/27/07 BY LUFKIN INDUSTRIES 200 HP
| Tag Number:9121 Model:100B | GRAFTON, OH |
|
|
|
 | |
B&P 100B GEAR BOX MODEL 64756EX S/N R-0280-182
| Tag Number:9122 Model:100B | GRAFTON, OH |
|
|
|
 | |
B&P 100B GEARBOX MODEL 64756EX S/N R3924-226
| Tag Number:9120 Model:100B | GRAFTON, OH |
|
|
|
 | |
B&P 100B GEARBOX MFG BY PITTSBURGH FOR 250 HP
| Tag Number:8641 Model:100B | GRAFTON, OH |
|
|
|
 | |
B&P 50 A GEAR BOX
| Tag Number:6596 Model:50A | GRAFTON, OH |
|
|
|
 | |
FALK / SIMPSON MODEL 10SM3F GEAR BOX RATIO 34.2 INPU 745 RPM
OUTPUT 21.8 RPM MO# 6-66130601-2
| Tag Number:9015 Model:10SM3F | GRAFTON, OH |
|
|
|
 | |
FALK / SIMPSON MODEL 10SM3F GEAR BOX RATIO 34.2 INPU 745 RPM
OUTPUT 21.8 RPM MO# 97-066146-01
| Tag Number:9017 Model:10SM3F | GRAFTON, OH |
|
|
|
 | |
FALK / SIMPSON MODEL 10SM3F GEAR BOX RATIO 34.2 INPU 745 RPM
OUTPUT 21.8 RPM MO#84-469175
| Tag Number:9014 Model:10SM3F | GRAFTON, OH |
|
|
|
 | |
FALK / SIMPSON MODEL 10SM3F GEAR BOX RATIO 34.2 INPU 745 RPM
OUTPUT 21.8 RPM MO#93-069954-01
| Tag Number:9016 Model:10SM3F | GRAFTON, OH |
|
|
|
 | |
MULLER GEAR BOX 2 1/2 FALK MO # 7-665872-01-13 37.57 RATIO
| Tag Number:8683 | GRAFTON, OH |
|
|
|
 | |
REBUILT BY B AND P 100B MODEL 64756EX GEARBOX S/N B7700-122
| Tag Number:8995 Model:64756EX | GRAFTON, OH |
|
|
|
 | |
SIMPSON 2 F GEAR BOX S/N 8-066414-01-12 RATIO 30.52 REBUILT 2008
| Tag Number:9071 Model:8SM2FA | GRAFTON, OH |
|
|
|
 | |
SIMPSON 26G FALK GEAR BOX MODEL 150SM6G 350 HP RATIO24.22 S/N MO-7-467157-01-1
| Tag Number:8402 Model:150SM6G | GRAFTON, OH |
|
|
|
 | |
SIMPSON 26G FALK GEAR BOX MODEL 150SM6G 350HP RATIO 24.22 S/NMO-7-066-980-01-1
| Tag Number:8401 Model:150SM6G | GRAFTON, OH |
|
|
|
 | |
SIMPSON 26G FALK GEAR BOX MODEL150SM6G-2A 350HP RATIO24.00
S/N MO-7-765679-01-1
| Tag Number:8400 Model:150SM6G | GRAFTON, OH |
|
|
|
 | |
SIMPSON 26G FALK MODEL 150SM6G GEAR BOX 350 HP RATIO 24.22
S/N MO-7-66980-4
| Tag Number:8399 Model:150SM6G | GRAFTON, OH |
|
|
|
| | |
SIMPSON 2F GEAR BOX MO# 7-9671-9701-15 RATIO 30.52
| Tag Number:9084 Model:2F | GRAFTON, OH |
|
|
|
 | |
SIMPSON 2F GEAR BOX RATIO 32.4 S/N 5620-7448
| Tag Number:6581 Model:2F | GRAFTON, OH |
|
|
|
 | |
SIMPSON 2F GEAR BOX RATIO 32.50 S/N 6-365098-01-07
| Tag Number:6541 Model:2F | GRAFTON, OH |
|
|
|
| | |
SIMPSON 3F GEARBOX MODEL 10SM3F RATIO 34.2 S/N 6-564598
| Tag Number:9194 | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 10SM3FA GEAR BOX S/N 7-46-6930-01-4 RATIO 34.
| Tag Number:9261 Model:3F | GRAFTON, OH |
|
|
|
| | |
SIMPSON MODEL 10SM3FA GEAR BOX S/N 99-058974-01 RATIO 34.
| Tag Number:9260 Model:3F | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 10SMF-3F-A GEAR BOX NEW OR REBUILT RATIO 34.2 INPUT 745 OUTPUT 21.8
| Tag Number:9243 Model:3F | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 2.5F GEARBOX RATIO 37.57 S/N 7-067737-01-11
| Tag Number:8469 Model:10SM2.5FA | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 8SM2FA GEARBOX S/N 6-661235-01-7 RATIO 30.52
INPUT 789 OUTPUT 25.8
| Tag Number:9054 Model:8SM2FA | GRAFTON, OH |
|
|
|
 | |
SIMPSON MODEL 8SM2FA GEARBOX S/N ON TAG
| Tag Number:9055 Model:8SM2FA | GRAFTON, OH |
|
|
|
 | |
SPARE NEW OR REBUILT 26G OR 6G GEARBOX MODEL 150SM 6G-2A S/N 08-071839-01 RATIO 24.22
| Tag Number:8825 Model:150SM 6G-2A | GRAFTON, OH |
|
|
|
 | |
SPARE NEW OR REBUILT 26G OR 6G GEARBOX MODEL 150SM 6G-2A S/N 8-566138 RATIO 24.22
| Tag Number:8826 Model:150SM 6G-2A | GRAFTON, OH |
|
|
|
| | |
SIMPSON 3F MULLER ELECTRIC MOTOR
| Tag Number:6234 Model:3F | GRAFTON, OH |
|
|
|
| | |
SIMPSON 3F MULLER MOTOR 75 HP
| Tag Number:6244 Model:3F | GRAFTON, OH |
|
|
|
| | |
SPARE 60 HP MOTOR FOR 2 1/2F MULLER
| Tag Number:7884 Model:2.5 F | GRAFTON, OH |
|
|
|
 | |
PARTS FOR 26G DRIVE GEAR
| Tag Number:8876 | GRAFTON, OH |
|
|
|
| | |
SIMPSON 22G NEW BOTTOM PLATES (1) SET
| Tag Number:9072 Model:22G | GRAFTON, OH |
|
|
|
 | |
NEW OR REBUILT 6G OR 26G MULLER WHEEL
| Tag Number:8837 Model:6G | GRAFTON, OH |
|
|
|
| | |
SIMPSON 3G WHEEL 10" X 38"
| Tag Number:8705 Model:3G | GRAFTON, OH |
|
|
|
 | |
SPARE SET OF MULLER WHEELS FOR 2 1/2F MULLER 10" X 33"
| Tag Number:7883 Model:2.5F | GRAFTON, OH |
|
|
PREPARATOR |
|
 | |
NEW 24" BELT FOR ROYER PREARATOR
| Tag Number:8148.1 | GRAFTON, OH |
|
|
|
 | |
NEW 36" BELT ROYER PREPARATOR
| Tag Number:8148 | GRAFTON, OH |
|
|
RECLAIM |
|
 | |
1989 G/K MODEL VM64 LUMP CRUSHER S/N C6604 COMPLETE WITH BASE AND CONTROLS, 3 MOTORS AND AR LININGS IN VERY GOOD CONDITION
| Tag Number:1 Model:VM64 | GRAFTON, OH |
|
|
|
 | |
1991 G/K MODEL VM64 LUMP CRUSHER S/N C6980.1 COMPLETE WITH BASE, 3 MOTORS, NEW NI HARD LINERS, NOTE: MOTORS AND DOOR ARE IN STORAGE AND MACHINE IS MISSING DOOR CYLINDERS
| Tag Number:2 Model:VM64 | GRAFTON, OH |
|
|
|
 | |
NATIONAL ENGINEERING 4 CELL MECHANICAL RECLAIMER WITH 40 HP BLOWER AND MOTOR AND CONTROLS
| Tag Number:3 Model:4 CELL | GRAFTON, OH |
|
|
|
 | |
NATIONAL ENGINEERING 4 CELL MECHANICAL RECLAIMER WITH 40 HP BLOWER AND MOTOR AND CONTROLS
| Tag Number:4 Model:4 CELL | GRAFTON, OH |
|
|
SAW |
|
 | |
DOALL BAND SAW MODEL ML, 16" THROAT 9" HIEGHT 220 VOLTS 24X24 TABLE BAND LENGTH 120 MOTOR 3370 VARABLE
| Tag Number:9190 Model:ML | GRAFTON, OH |
|
|
|
 | |
DOALL MODEL TF-25SA TILT FRAME VERTICAL BAND SAW S/N 365-77127, BLADE LENGTH 209" WITH POWER FEED AND CLAMP, HYDRAULIC SYSTEM, COOLANT SYSTEM
| Tag Number:9248 Model:TF-25SA | GRAFTON, OH |
|
|
|
| | |
GROB BAND SAW, 24" WITH WELDER
| Tag Number:7633 Model:24"W/WELDER | GRAFTON, OH |
|
|
|
 | |
GROB BAND SAW, MODEL TYPE 4V-18, S/N 679, SLOTTED TABLE W/18" THROAT, 1969
| Tag Number:3468 Model:TYPE 4V-18 | GRAFTON, OH |
|
|
|
 | |
JET VERTICAL BAND SAW MODEL WBS-24 3 HP 230 VOLTS S/N 860035
| Tag Number:8916 Model:WBS-24 | GRAFTON, OH |
|
|
|
 | |
NORTHFIELD MODEL 27 27" VERTICAL BAND SAW S/N 572843J
| Tag Number:8960 Model:27 | GRAFTON, OH |
|
|
|
| | |
POWERMATIC BAND SAW MDL 87 19" THROAT SN 087236 WITH BLADE WELDER, TABLE SIZE 24" X 24"
| Tag Number:6770 Model:87 | GRAFTON, OH |
|
|
|
 | |
POWERMATIC BAND SAW MODEL 81 19" THROAT 10" HIGH S/N 9-2124
| Tag Number:8964 Model:81 | GRAFTON, OH |
|
|
|
| | |
POWERMATIC MODEL 81 VERTICAL BAND SAW 12" THROAT 20" CLEARANCE TILTING TABLE S/N 881027
| Tag Number:8459 Model:81 | GRAFTON, OH |
|
|
|
 | |
20" FOX CUTOFF SAW, 15 HP
| Tag Number:9171 | GRAFTON, OH |
|
|
|
 | |
20" FOX CUTOFF SAW, 15 HP
| Tag Number:9172 | GRAFTON, OH |
|
|
|
 | |
24" FOX CUTOFF SAW, 25 HP
| Tag Number:9169 Model:6 TMC | GRAFTON, OH |
|
|
|
 | |
BRICK SAW 12" WHEEL 7.5
| Tag Number:8163 | GRAFTON, OH |
|
|
|
 | |
CARBORUNDUM CUT-OFF SAW WITH BOOTHE, MODEL 20-15P
S/N 20-15-66036, 16" - 1" HOLE WITH VISE, SPLIT A
| Tag Number:3937 Model:2015P | GRAFTON, OH |
|
|
|
 | |
TABOR 16" 10 HP CUTOFF SAW
| Tag Number:7246 | GRAFTON, OH |
|
|
|
 | |
TABOR CUT-OFF SAW MODEL CR16 10 HP 16 "
| Tag Number:7581 Model:16 -10HP | GRAFTON, OH |
|
|
|
 | |
TABOR MODEL CR-25-2-24-V4SEB 24" CUT-OFF SAW 25 HP S/N 76-M-2463
| Tag Number:9225 Model:CR-25-2-24-V4SEB | GRAFTON, OH |
|
|
|
 | |
SAVAGE MODEL WJS20 24" HYDRAULIC RADIAL ARM SAW S/N 89-313 WITH HYDRUALIC SYSTEM, 180 DEGREE TABLE R
| Tag Number:7016 Model:WJS20 | GRAFTON, OH |
|
|
|
 | |
US ELECTRIC MODEL SFC-30 SWING FRAME SAW 30" WHEEL 25HP 1800RPM 460 VOLTS FULL WHEEL 30" X1/4" X 1 3/4 " ARBOR
| Tag Number:9241 Model:SFC-30 | GRAFTON, OH |
|
|
SCREEN |
|
 | |
G/K MODEL FRP36.7 S/N C1336.1
| Tag Number:7280 | GRAFTON, OH |
|
|
|
 | |
TYLER DOUBLE DECK SCREEN TYPE 110 36"X 8' S/N 50933
| Tag Number:8898 Model:TYPE 110 | GRAFTON, OH |
|
|
|
 | |
SWECO 5" DIAMETER SCREEN
| Tag Number:9224 | GRAFTON, OH |
|
|
SHAKEOUT |
|
 | |
G/K TOP DRIVE SHAKEOUT MODEL SMTM 36.8 S/N C7187-1
| Tag Number:8896 Model:SMTM 36.8 | GRAFTON, OH |
|
|
|
 | |
1992 DIDION MODEL MD100 ROTARY MEDIA DRUM SHAKEOUT S/N DM-445
| Tag Number:9050 Model:MD100 | GRAFTON, OH |
|
|
|
 | |
2001 DIDION MODEL MD-100 V MK5 ROTARY SHAKEOUT S/N DM-609 NEW DRUM 2003, 5.1 RPM, AR450 OUTER SHELL, FIXED SPEED DRIVE
| Tag Number:8856 Model:MD-100 V MK5 | GRAFTON, OH |
|
|
|
 | |
DIDION MODEL MD50 CONVERTED TO A 50 TPH GREEN SAND LUMP CRUSHER OR 10 TPH NOBAKE LUMP CRUSHER S/N DM 398 USED ONLY ONE MONTH 25' LONG
| Tag Number:8638 Model:MD50 | GRAFTON, OH |
|
|
|
 | |
1993 G/K MODEL SMTM42.12 42" X 12' TOP DRIVE SHAKEOUT S/N C7322.5 2- 3 HP DRIVES RATED AT 50 TPH SAND, 10 TPH METAL, 2- 3 HP DRIVES
| Tag Number:8854 Model:SMTM42.12 | GRAFTON, OH |
|
|
TRANSPORTER |
|
| | |
32" ACROSS, 26" HIGH, SIMILAR TO REDFORD SL4
| Tag Number:2248 Model:SL4 | GRAFTON, OH |
|
|
|
 | |
DYNAMIC AIR TRANSPORTER WITH NO CONTROLS CAPACITY 10 CF
10" INLET 3" OUTLET
| Tag Number:9201 Model:10 J 100 | GRAFTON, OH |
|
|
|
| | |
REDFORD MODEL SL-4 SAND TRANSPORTER
| Tag Number:7473 Model:SL4 | GRAFTON, OH |
|
|
|
| | |
REDFORD MODEL SL4 TRANSPORTER
| Tag Number:9202 Model:SL4 | GRAFTON, OH |
|
|
|
| | |
REDFORD MODEL SL4 SAND TRANSPORTER NSN
| Tag Number:7204 Model:SL4 | GRAFTON, OH |
|
|
|
 | |
REDFORD SAND FEED HOPPER MODEL SL4
| Tag Number:5635.1 Model:SL4 | GRAFTON, OH |
|
|
|
| | |
REDFORD SL4 TRANSPORTER
| Tag Number:7416 Model:SL4 | GRAFTON, OH |
|
|
|
 | |
WHIR-AIR -FLOW MODEL 8APT 75 TRANSPORTER WITH CONTROLS
| Tag Number:8817 Model:8APT-75 | GRAFTON, OH |
|
|
VACCUM |
|
 | |
NEW STAHL GAS-TECH II MODEL 99658 VACUUM TEST STAND WITH PUMP S/N 05070002
| Tag Number:4657 Model:GAS-TECH II | GRAFTON, OH |
|
|
|
 | |
STAHL GAS-TECH II MODEL 99658 VACUUM TEST STAND WITH PUMP S/N 9503751
| Tag Number:4658 Model:GAS-TECH II | GRAFTON, OH |
|
|
